Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Sklar Instruments Wire Puller Sklar Microscopy Surgical 1/EA
Wire Puller Sklar Microscopy Surgical 1/EA
AVANTOR MASTERFLEX (VWR LLC) TBNG LMT-55 1.52MM ID 33FT/PK
Masterflex Ismatec Pump Tubing, Tygon LMT-55, 1.52 mm ID; 33 ft, Avantor
Grainger InsulMultitapCon PVC 14 AWG 1/0 AWG
The Polaris Insulated Multitap Connector is an electrical connector that allows multiple wires to be connected to a single point. It is rated for 600 volts and can accommodate wire sizes from 14-10 AWG. The connector has 4 ports and is made from thermoplastic polyester with nickel-plated brass terminals. It is UL listed and CSA certified. The multitap is insulated to help prevent shorts and is ideal for splicing and extending circuits. This connector can be installed by stripping the wires, inserting them into the ports, and tightening the screws to secure the wires. It is manufactured by Polaris in the United States.
Foxx Life Sciences EZBiopure Chemically Resistant Fluoroelastomer (FKM) Supercritical Fluid Transfer Tubing 10mm (25/64") ID X 16mm (5/8") OD, 25FT
EZBiopure Fluoroelastomer (FKM) Tubing (popularly known as Viton tubing) is engineered for supercritical fluid transfer and the safe handling of highly corrosive chemicals and solvents in pharmaceutical applications. It is produced in a controlled cleanroom environment to meet stringent food and pharma-grade standards.
Features
Made and packaged in an ISO Class 7 certified cleanroom.
Chemical Resistance: Excellent compatibility with alcohols, acids, and halogenated solvents (e.g., IPA, MDC).
High Safety: Superior flame and fire resistance.
Wide Temperature Range: Operational from –15°C to +250°C.
Applications:
Corrosive chemical transfer
Chlorinated, fluorinated chemical transfer
Chemical and analytical analysis
Fuel and oil industries
Certifications
FDA 21 CFR 177.2600 Certificate
USP Class VI Certificate
Phthalates / Bis Phenol / Plasticizer free Certification
TSE/BSE Free Certification
5 years Shelf Life
BURKLE INC PE hose, inner-x outer-Ø 0.24x0.31 in. (6x8 mm), 328.08 in. (100 m)
The PE hose is characterized by its robustness and reliability. It is suitable for high operating requirements with less flexibility and can be used for pressure applications. It is made of high-quality polyethylene, which gives it excellent resistance to (non-oxidizing) acids, alkalis, salts and a variety of solvents. The hose is very light and dimensionally stable up to + 80 °C. PE hoses have good transparency for optimum visual inspection and have excellent odor and taste neutrality properties.
Accuflow Systems Saint-Gobain Silicone Tubing, Ultra-Pure Platinum-Cured, 0.38 in ID, 50 ft
Saint-Gobain Sani-Tech Ultra-C silicone tubing is an ultra-pure, platinum-cured silicone tube engineered for biopharmaceutical and laboratory fluid transfer applications. It provides low extractables, extended pump life, and compatibility with repeated autoclaving for sterile processing, media handling, and fill/finish operations.
- Ultra-pure platinum-cured silicone construction.
- 0.38 in (9.53 mm) inner diameter.
- 0.63 in (15.88 mm) outer diameter.
- 0.13 in (3.18 mm) wall thickness.
- 50 ft (15.24 m) coil length.
- 50 Shore A hardness.
- Temperature range -80 °F (-62 °C) to 500 °F (260 °C).
- Meets USP <88> Class VI, USP <87>, ISO 10993-5, and European Pharmacopoeia 3.1.9.
- Typical applications: sterile fill and transfers, media/buffer processing, pumping, cell culture, chromatography, filtration, and fermentation.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Tubing, 1/8"" X 3/16""; 25 Ft/Pk
This tubing is ideal for general laboratory use. They offer long life, won't age or oxidize, fits tightly to glass and metal, bends to small radius curves, are nontoxic. FDA compliant and made according to GMP. Temperature range is -51 to 165¿F (-46 to 73¿C). Can be sterilized with ethylene oxide or autoclave.
AVANTOR MASTERFLEX (VWR LLC) C-Flex Animal-Derived Component Free (ADCF) 1/4 x 7/16"" Tubing, 50Ft
Characteristics: Exceptional tensile and tear strength, good biocompatibility, excellent chemical resistance, low gas permeability, and a smooth surface. Transparent. Certification: Resin meets USP and Class VI requirements. Tubing is manufactured according to GMP. Temperature range: -50 to 275¿F (-45 to 135¿C) Sterilize: Autoclave, ethylene oxide, or gamma irradiation.
AVANTOR MASTERFLEX (VWR LLC) MSTRFLX TBNG 1.65MM ID 100FT
Masterflex Ismatec Pump Tubing, Tygon E-Lab, 1.65 mm ID; 100 ft, Avantor